Top outer shell. Includes shutter button, ISO scroll wheel, mode dial, on-off switch, flash, top microphone, and hot shoe mount. Attaches to spine structure using SCREW-E06.
5 cables: CABLE-R08, CABLE-W02, CABLE-W03, CABLE-W05, CABLE-F01
126 mm x 70 mm x 90 mm
Mirror box. Attaches to spine structure using SCREW-I13.
no cables.
70 mm x 48 mm x 66 mm
Lens contact pins. Attaches to mirror box assembly using SCREW-E09.
1 cable: CABLE-R01
35 mm x 7 mm x 13 mm
Main viewfinder. Attaches to mirror box assembly using SCREW-I09B.
1 cable: CABLE-R05
48 mm x 54 mm x 36 mm
Exposure sensor. Attaches to mirror box assembly using SCREW-I11.
1 cable: CABLE-R02
36 mm x 17 mm x 23 mm
Top viewfinder. Attaches to main viewfinder assembly using SCREW-I09A.
1 cable: CABLE-R04
45 mm x 35 mm x 27 mm
Shutter motor and shutter front plate. Attaches to mirror box assembly using SCREW-I14.
1 cable: CABLE-R03
65 mm x 33 mm x 60 mm
Shutter blades. Held in place by shutter assembly and rear shutter plate.
no cables
42 mm x <1 mm x 27 mm
CMOS sensor. Attaches to the spine structure using SCREW-I03A and SCREW-I03B.
1 cable: CABLE-R07
42 mm x <1 mm x 27 mm
Flash hook. Attaches to top outer shell assembly using SCREW-I19.
no cables
16 mm x 45 mm x 19 mm
Rear outer shell. Includes button covers and display glass. Attaches to spine structure using SCREW-E04.
no cables
126 mm x 41 mm x 75 mm
Rear LCD. Attaches to rear outer shell assembly using SCREW-I16.
1 cable: CABLE-R09
70 mm x 11 mm x 60 mm
Front daughterboard. Attaches to spine structure using SCREW-I08.
5 cables: CABLE-R06, CABLE-W01, CABLE-W02, CABLE-W03, CABLE-W04
51 mm x 50 mm
SD card reader board. Attaches to spine structure using SCREW-I04.
1 cable: CABLE-R06
48 mm x 43 mm
Motherboard. Attaches to spine structure using SCREW-I02.
13 cables: CABLE-R01, CABLE-R02, CABLE-R03, CABLE-R04, CABLE-R05, CABLE-R06, CABLE-R07, CABLE-R08, CABLE-R09, CABLE-R10, CABLE-W04, CABLE-W05, CABLE-F01
118 mm x 56 mm
Rear input board. Held in place by rear input board backplate and rear outer shell assembly.
1 cable: CABLE-R10
47 mm x 66 mm
Ribbon cable. Connects lens contact pin assembly to motherboard.
2 connections
88 mm
Ribbon cable. Connects exposure sensor assembly to motherboard.
2 connections
81 mm
Ribbon cable. Connects shutter motor to motherboard.
2 connections
70 mm
Ribbon cable. Connects top viewfinder assembly to motherboard.
2 connections
143 mm
Ribbon cable. Connects main viewfinder assembly to motherboard.
2 connections
66 mm
Ribbon cable. Connects front daughterboard to SD card reader board and motherboard.
3 connections
55 mm
Ribbon cable. Connects CMOS sensor to motherboard.
2 connections
34 mm
Ribbon cable. Connects top outer shell assembly to motherboard.
2 connections
30 mm
Ribbon cable. Connects rear LCD assembly to motherboard.
2 connections
127 mm
Ribbon cable. Connects rear input board to motherboard.
2 connections
52 mm
Power cable, red and black. Connects shutter motor to front daughterboard.
2 connections
113 mm
Power cable, white and yellow. Connects top outer shell assembly to front daughterboard.
2 connections
115 mm
Power cable, light and dark grey. Connects top outer shell assembly to front daughterboard.
2 connections
129 mm
Power cable, blue and orange. Connects front daughterboard to motherboard.
2 connections
50 mm
Power cable, Orange and black. Connects microphone in top outer shell assembly to motherboard.
2 connections
75 mm
Fiber optic cable, Black. Connects top outer shell assembly to motherboard.
2 connections
35 mm
Front outer shell. Attaches to mirror box assembly using SCREW-E07 and to top outer shell assembly using SCREW-I01.
Black plastic
126 mm x 50 mmx 94 mm
Lens mount ring. Attaches to mirror box assembly using SCREW-E08.
Silver metal
65 mm x 3 mm x 65 mm
Lens mount locking pin. Held in place by lens mount ring and secondary lens mount ring.
Silver metal
65 mm x 3 mm x 65 mm
Lens mount locking pin spring. Held in place by lens mount locking pin and secondary lens mount ring.
Silver metal
8 mm x 8 mm x 5 mm
Secondary lens mount ring. Held in place by lens mount ring and mirror box assembly.
Brown metal
63 mm x <1 mm x 63 mm
Grip. Attaches to front outer shell using tape.
Black rubber
52 mm x 24 mm x 58 mm
Base plate. Attaches to spine structure using SCREW-I06.
Silver metal
55 mm x 41 mm x 9 mm
Battery door holder. Attaches to front outer shell using SCREW-I18.
Black plastic
36 mm x 7 mm x 7 mm
Spine structure. Attachment point for most parts.
Black plastic
122 mm x 34 mm x 66 mm
Battery door. Held in place by front outer shell, battery door holder, and rear outer shell assembly.
Black plastic
47 mm x 27 mm x 7 mm
Top reinforcement bracket. Attaches to spine structure using SCREW-I12.
Silver metal
38 mm x 30 mm x 10 cm
Left strap anchor. Attaches to spine structure using SCREW-I07A.
Silver metal
3 mm x 16mm x16 mm
Right strap anchor. Attaches to spine structure using SCREW-I07B.
Silver metal
2 mm x 16 mm x 12 mm
Battery spring. Held in place by top reinforcement bracket and spine structure.
silver metal
10 mm x 10 mm x 18 mm
Shutter blade spring. Held in place by shutter blade assembly and rear shutter plate.
Silver metal
2 mm x 1 mm x 11 mm
Rear shutter plate. Attaches to shutter assembly using SCREW-I15.
Black plastic
53 mm x 3 mm x 50 mm
CMOS sensor springs. Held in place by CMOS sensor assembly and spine structure.
3x silver metal
5 mm x mm x 5mm
Middle reinforcement bracket. Attaches to spine structure using SCREW-I05.
Silver metal
56 mm x 21 mm x 16 mm
Left reinforcement bracket. Attaches to spine structure using SCREW I07A, SCREW-I03A, and SCREW-I02.
Silver metal
26 mm x 60 mm x 18 mm
Right reinforcement bracket. Attaches to spine structure suing SCREW-I04 and SCREW-I02.
Silver metal
59 mm x 10 mm x 57 mm
CMOS sensor bracket. Attaches to CMOS sensor assembly and spine structure using SCREW-I03B.
Silver metal
55 mm x 5 mm x 58 mm
Left I/O shield. Attached to motherboard using SCREW-E02.
Black plastic
11 mm x 16 mm x 44 mm
Left I/O cover. Held in place by left I/O shield.
Black rubber
20 mm x 16 mm x 45 mm
Rear input board backplate. Attaches to rear outer shell assembly using SCREW-I17.
Light grey metal
42 mm x 9 mm x 70 mm
Viewfinder knob. Screws into top viewfinder assembly.
Black/silver metal
8 mm x 12 mm x 8 mm
Viewfinder cover. Attaches to main viewfinder assembly using SCREW-E05.
Black plastic
35 mm x 10 mm x 24 mm
Viewfinder eyecup. Slides onto viewfinder cover.
Black rubber
40 mm x 10 mm x 24 mm
Rear status LED diffuser. Attaches to rear outer shell assembly.
Black rubber
40 mm x 10 mm x 24 mm
Left-facing. Above rubber I/O cover. Secures rear outer shell assembly to spine structure.
1x Philips #000, 5 mm
Black
Left-facing. Under rubber I/O cover. Secures left I/O shield to motherboard.
1x Philips #000, 5 mm
Black
Bottom-facing. External. Secures rear outer shell assembly to spine structure.
4x Philips #000, 5 mm
Black
Bottom -facing. External. Secures front outer shell to spine structure.
4x Philips #000, 5 mm
Black
Right-facing. External. Secures rear outer shell assembly to spine structure.
2x Philips #000, 5mm
Black
Back-facing. Under viewfinder eyecup. Secures viewfinder cover to main viewfinder assembly.
2x Philips #000, 5 mm
Black
Top-facing. External. Secures top outer shell assembly to spine structure.
2x Philips #000, 5 mm
Black
Front-facing. Above lens mount ring. Secures front outer shell to mirror box assembly.
2x Philips #000, 6 mm
Black
Front-facing. Secures lens mount ring to mirror box assembly.
4x Philips #00, 7 mm
Silver
Front-facing. Secures lens contact pin assembly to mirror box assembly.
2x Philips #00, 4 mm
Black
Bottom-facing. Under rubber grip. Secures front outer shell to top outer shell assembly.
1x Philips #000, 4 mm
Silver
Rear-facing. Secures motherboard to spine structure.
5x Philips #000, 5 mm
Silver
Rear-facing. Secures CMOS sensor bracket to spine structure.
5x Philips #000, 4 mm
Silver
Rear-facing. Secures CMOS sensor to spine structure.
3x T6, 6 mm
Silver
Rear-facing. Secures SD card reader board to spine structure.
3x Philips #000, 4 mm
Silver
Rear-facing. Secures middle reinforcement bracket to spine structure.
3x Philips #000, 8 mm
Silver
Bottom-facing. Secures base plate to spine structure.
4x Philips #000, 5 mm
Silver
Left-facing. Secures left strap anchor to spine structure.
2x Philips #000, 4 mm
Silver
Right-facing. Secures right strap anchor to spine structure.
2x Philips #000, 4 mm
Silver
Front-facing. Secures front daughterboard to spine structure.
3x Philips #000, 4 mm
Silver
Top-facing. Secures top viewfinder assembly to main viewfinder assembly.
3x Philips #00, 4 mm
Silver
Top-facing. Secures main viewfinder assembly to mirror box assembly.
4x Philips #00, 5 mm
Silver
Rear-facing. Secures viewfinder cover to main viewfinder assembly.
3x Philips #00, 4 mm
Silver
Bottom-facing. Secures exposure sensor assembly to mirror box assembly.
2x Philips #00, 5 mm
Silver
Top and rear-facing. Secures top reinforcement bracket to spine structure.
2x Philips #000, 4 mm
Silver
Rear-facing. Secures mirror box assembly to spine structure.
2x Philips #000, 8 mm
Silver
Rear-facing. Secures shutter assembly to mirror box assembly.
2x Philips #000, 8 mm
Silver
Rear-facing. Secures rear shutter plate to shutter assembly.
1x Philips #000, 5 mm
Silver
Front-facing. Secures rear LCD assembly to rear outer shell assembly.
4x Philips #000, 5 mm
Silver
Front-facing. Secures rear input board backplate to rear outer shell assembly.
3x Philips #000, 5 mm
Silver
Rear-facing. Secures battery door holder to front outer shell.
2x Philips #000, 5 mm
Silver
Bottom-facing. Secures flash hook assembly to top outer shell assembly.
2x Philips #000, 5 mm
Silver
Created by Richard Fu ↗.